Meridian Technology Group is looking for a/an Integration and Test Engineer.
Responsibilities:
•You must be a self-starter that will seek out the solutions to technical problems with the local team along with the larger workforce. Expect interactions with all departments and aspects of the rocket design
•Tasked with solving real-world engineering problems daily, serving as and integration and test engineer for the First or Second Stage in Texas.
•Develop methods to automate a variety of high pressure and non-destructive inspections
•Responsible for management and closure of specific Falcon 9 major assembly work order ensuring that all hardware kits are defined and integrated properly complying to the referenced drawing configuration and all test procedures are defined and executed properly
•Lead or participate in relevant avionics and/or propulsion system level checkouts including establishing/defining test objectives, procedure writing/review, leading test readiness reviews, conducting tests, and performing data review
•Responsible for creation and closure of integration and/or test anomalies associated with F9 major integrated hardware assembly work order through utilization of the resource planning system
•Coordinates and prioritizes all cross-disciplinary assembly activities consistent with the specific major hardware assembly concept of operations ensuring top-level schedule milestones are met
•Responsible for daily task list and coordinates with production floor managers for technician and resource support
•Communicates with build, process and design engineering as necessary to ensure that material supply to the hardware kits in the major assembly bill of materials are delivered in pace and consistent with the integrated concept of operations and schedule
•Updates and optimizes integrated concept of operations for the F9 major integrated hardware assembly as required throughout production build
•Approves top-level assembly releases/EOs
•Provides direct support to Flight Systems Management for pre-ship reviews to ensure that the F9 major integrated hardware assembly satisfies system level requirements before shipment to the test or launch site
•Will be required to provide frequent technical support for integrated hardware assembly operations with engineering personnel at the Hawthorne production facility,
•Some travel to the production or launch sites to support vehicle operations may be required
Basic Qualifications:
•Bachelors of Science in Engineering (Mechanical, Electrical, Aerospace, or other), plus 2 years of applicable work experience
•Minimum of 3 years of experience as a manufacturing or test engineer
Preferred Skills and Experience:
•Master of Science in Engineering field preferred
•Experience with complex, multi-disciplinary system assemblies. Past work experience, internships, team/personal projects with aerospace vehicles/payloads, automotive, aircraft, marine assemblies qualify
•Some experience with structural acceptance testing, integrated avionics testing, RF testing and/or system level propulsion leak checks preferred
•Strong interpersonal and organizational skills
•Experience as a technical project lead is preferred
•Proficiency in or hands-on experience with one or more of the following: launch vehicle or spacecraft integration; test operations with gases/fluids; data acquisition setup and field measurements
•Firm understanding of Non-Destructive inspection techniques for metallic and composite components
Additional Requirements:
•Flight hardware typically is built in tight quarters and physical dexterity is required
•Ability to perform work expectations and thrive in a high-stress environment
•Willingness to work outdoors
•Occasional travel may be required.
•Physical effort including standing, lifting and carrying moderately heavy materials or equipment (15 to 50 lbs.)
•Physical requirements: Overall mental fitness; the ability to work in a high-concentration, high-stress environment; good response to challenges posed by short deadlines; prolonged mental concentration (under possible extended work hours)
•Typically 50 hour work weeks, schedule varies depending on site operational needs, flexibility required
•Overtime is frequently required for particular tasks or launch campaigns
ITAR Requirements:
•To conform to U.S. Government space technology export regulations, applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about ITAR here.
Meridian Technology Group is committed to equal employment opportunity (EEO) and non-discrimination for all employees. All hiring is contingent on eligibility to work in the United States.
Ready to Apply?
Apply online or email your resume: it_jobs @meridiangroup.com
www. meridiangroup.com
or...
For more information about this position, contact:
Meridian Technology Group Recruiting Team
(817)601-4651 in Texas
(800)698-0853 outside Texas
Responsibilities:
•You must be a self-starter that will seek out the solutions to technical problems with the local team along with the larger workforce. Expect interactions with all departments and aspects of the rocket design
•Tasked with solving real-world engineering problems daily, serving as and integration and test engineer for the First or Second Stage in Texas.
•Develop methods to automate a variety of high pressure and non-destructive inspections
•Responsible for management and closure of specific Falcon 9 major assembly work order ensuring that all hardware kits are defined and integrated properly complying to the referenced drawing configuration and all test procedures are defined and executed properly
•Lead or participate in relevant avionics and/or propulsion system level checkouts including establishing/defining test objectives, procedure writing/review, leading test readiness reviews, conducting tests, and performing data review
•Responsible for creation and closure of integration and/or test anomalies associated with F9 major integrated hardware assembly work order through utilization of the resource planning system
•Coordinates and prioritizes all cross-disciplinary assembly activities consistent with the specific major hardware assembly concept of operations ensuring top-level schedule milestones are met
•Responsible for daily task list and coordinates with production floor managers for technician and resource support
•Communicates with build, process and design engineering as necessary to ensure that material supply to the hardware kits in the major assembly bill of materials are delivered in pace and consistent with the integrated concept of operations and schedule
•Updates and optimizes integrated concept of operations for the F9 major integrated hardware assembly as required throughout production build
•Approves top-level assembly releases/EOs
•Provides direct support to Flight Systems Management for pre-ship reviews to ensure that the F9 major integrated hardware assembly satisfies system level requirements before shipment to the test or launch site
•Will be required to provide frequent technical support for integrated hardware assembly operations with engineering personnel at the Hawthorne production facility,
•Some travel to the production or launch sites to support vehicle operations may be required
Basic Qualifications:
•Bachelors of Science in Engineering (Mechanical, Electrical, Aerospace, or other), plus 2 years of applicable work experience
•Minimum of 3 years of experience as a manufacturing or test engineer
Preferred Skills and Experience:
•Master of Science in Engineering field preferred
•Experience with complex, multi-disciplinary system assemblies. Past work experience, internships, team/personal projects with aerospace vehicles/payloads, automotive, aircraft, marine assemblies qualify
•Some experience with structural acceptance testing, integrated avionics testing, RF testing and/or system level propulsion leak checks preferred
•Strong interpersonal and organizational skills
•Experience as a technical project lead is preferred
•Proficiency in or hands-on experience with one or more of the following: launch vehicle or spacecraft integration; test operations with gases/fluids; data acquisition setup and field measurements
•Firm understanding of Non-Destructive inspection techniques for metallic and composite components
Additional Requirements:
•Flight hardware typically is built in tight quarters and physical dexterity is required
•Ability to perform work expectations and thrive in a high-stress environment
•Willingness to work outdoors
•Occasional travel may be required.
•Physical effort including standing, lifting and carrying moderately heavy materials or equipment (15 to 50 lbs.)
•Physical requirements: Overall mental fitness; the ability to work in a high-concentration, high-stress environment; good response to challenges posed by short deadlines; prolonged mental concentration (under possible extended work hours)
•Typically 50 hour work weeks, schedule varies depending on site operational needs, flexibility required
•Overtime is frequently required for particular tasks or launch campaigns
ITAR Requirements:
•To conform to U.S. Government space technology export regulations, applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about ITAR here.
Meridian Technology Group is committed to equal employment opportunity (EEO) and non-discrimination for all employees. All hiring is contingent on eligibility to work in the United States.
Ready to Apply?
Apply online or email your resume: it_jobs @meridiangroup.com
www. meridiangroup.com
or...
For more information about this position, contact:
Meridian Technology Group Recruiting Team
(817)601-4651 in Texas
(800)698-0853 outside Texas